Nickel Alloys
Sr. No.
Material
Size
Sch. & Swg.
Specification
Manufacturer
1.
Cupro Nickel
Hastelloy
Nickel
Monel
Inconel
Alloy 20
Duplex
6.35 mm OD
to
152 mm OD
&
15 NB
to
150 NB
20 Swg.,
18 Swg.,
16 Swg.,
14 Swg.,
12 Swg.,
10 Swg.,
& Sch.
10, Sch.
40Sch.
80 Etc.
IS
BS
ASTM
UNS
Imported
&
Indian Mfg
Note
Nickel Alloy in Grade
:
Cupro Nickel (90/10, 70/30, 66/30/2/2), Hastelloy (C-4, C-22, C276, B-2),
Nickel (200 / 201 / 205), Monel (400 & K500), Inconel (600, 601, 625 & 825), Incolloy (800, 800H), Alloy 20, Duplex Steel, SS 904L, Titanium Etc.
In Form of
:
Round, Coil, Shaft, ‘U’ Shape Etc.
In Length of
:
Standard length & In Cut length also.
Test Certificate
:
Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit.
Other Services
:
Draw & Expansion as per required Size & Length, Heat Treatment,
Bending, Anneling & Pickled, Machining Etc.
Specialize
:
Cupro Nickel Tube
Range of Buttweld [B/W] Fitting
Sr. No.
Material
Size
Sch. & Swg.
Specification
Item
1.
Cupro
Nickel Hastelloy
Nickel
Monel
Inconel
Alloy 20
Duplex
6.35 mm OD
to
152 mm OD
&
15 NB
to
150 NB
20 Swg.,
18 Swg.,
16 Swg.,
14 Swg.,
12 Swg.,
10 Swg.,
&
Sch. 10,
Sch. 40
Sch. 80 Etc.
IS
BS
ANSI
ASTM
UNS
Bend (Long &Short)
Elbow (180o, 90o & 45o)
Tee (Equal & Unequal)
Reducer (Con & Ecc)
CAP
Stubend
(Long & Short)
Nipple (Barrel)
^ TOP
Range of Forged Fetting
Sr. No.
Material
Size
Class
Specification
Item
1.
Cupro Nickel
Hastelloy
Nickel
Monel
Inconel
Alloy 20
Duplex
3000#
6000#
ASTM
BS
DIN
Elbow - 90o & 45o
Tee - Equal & Reducing
Union
Cross
Coupling - Full & Half
Socket - Reducing
CAP
Plug-Hex & Square
Nipples (Hex/Reducing)
Bushing
Sokolet, Weldolet,
Thredolet, Elbolet & Nipolet
Range of Flanges
Sr. No.
Material
Size
Class
Specification
Item
1.
Cupro Nickel Hastelloy
Nickel
Monel
nconel
Alloy 20
Duplex
150#
300#
ASTM
BS
DIN
Flanges, SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing
ASA 150,300
Table D, E, F, H, DIN, ND-6, 10, 16, 25, 40
SORF, BLRF, LAP Joint & Spectacle
Note
Nickel Alloy in Grade
:
Cupro Nickel (90/10, 70/30, 66/30/2/2), Hastelloy (C-4, C-22, C276, B-2), Nickel (200 / 201 / 205), Monel (400 & K500), Inconel (600, 601, 625 & 825), Incolloy (800, 800H), Alloy 20, Duplex Steel, SS 904L, Titanium (1 & 2) Etc.
Test Certificate
:
Manufacturer Test Certificate / Under Third Party Inspection & with Excise Gate Pass to avail Modvat benefit.
^ TOP
Range of Sheet, Plate, Strip, Flat & Blank
Sr. No.
Material
Size
Thickness
Specification
Manufacturer
1.
Cupro Nickel
Hastelloy
Nickel
Monel
Inconel
Alloy 20
Duplex
1000 mm x 2000 mm
1220 mm x 2440 mm
(4' x 8')
1250 mm x 2500 mm
1500 mm x 3000 mm
2000 mm x 2000 mm
2000 mm x 4000 mm
0.1 mm
to
12 mm
Thk.
IS
BS
ASTM
UNS
Imported
&
Indian Mfg.
Note
Nickel Alloy In Grade
:
Cupro Nickel (90/10, 70/30), Hastelloy (C-4, C-22, C276, B-2), Nickel (200 / 201 / 205), Monel (K400 & K500), Inconel (600, 601, 625 & 825), Incolloy (800, 800H), Alloy 20, Titanium, Tungston, Moly, Kanthal, Nimonic Nichrome, Cobalt, Sanicro (28, SS 904L) Etc.
Sheet & Plate in Form of
:
Coils, Foils, Flats, Strip, Blank (Circle), Ring (Flange) & Perforated Sheet Etc.
Test Certificate
:
Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit.
Other Services
:
Anneling, Pickling, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Specialize
:
Perforated Sheet & Hastelloy Material.
Range of Rod,Wire & Flat
Sr. No.
Material
Diameter
Length
Specification
Manufacturer
1.
Cupro Nickel
Hastelloy
Nickel
Monel
Inconel
Alloy 20
Duplex
0.1 mm
to
100 mm
100 mm
to
300 mm
Long
ASTM
BS
DIN
Imported
Note
Nickel Alloy In Grade
:
Cupro Nickel (90/10, 70/30), Hastelloy (C-4, C-22, C276, B-2),
Nickel (200 / 201 / 205), Monel (K400 & K500), Inconel (600, 601, 625 & 825), Incolloy (800, 800H), Alloy 20, Titanium, Tungston, Moly, Kanthal, Nimonic Nichrome (80:20), Ferro Nickel Alloy (55/45,
60/40, 70/30), Cobalt, Sanicro (28, SS 904L) Etc.
Bar in Form of
:
Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh,
Billet, Ingot, Casting Etc.
Other Services
:
Machining (CNC), Heat Treatment, Anneling, Pickling, Rolling, Forging, Cutting,
Minor Fabrication Etc.
Test Certificate
:
Manufacturer Test Certificate / Under Third Party Inspection & with
Excise Gate Pass to avail Modvat benefit.
^ TOP